LCD response time

In technology, response time is the time a system or functional unit takes to react to a given input.

Contents

Data processing

In data processing, the response time perceived by the end user is the interval between

(a) the instant at which an operator at a terminal enters a request for a response from a computer and
(b) the instant at which the first character of the response is received at a terminal.

In a data system, the system response time is the interval between the receipt of the end of transmission of an inquiry message and the beginning of the transmission of a response message to the station originating the inquiry.[1]

Real-time Systems

In real-time systems the response time of a task or thread is defined as the time elapsed between the dispatch (time when task is ready to execute) to the time when it finishes its job (one dispatch). Response time is different from WCET which is the maximum time the task would take if it were to execute without interference. It is also different from deadline which is the length of time during which the task's output would be valid in the context of the specific system.

Display technologies

Response time is the amount of time a pixel in an LCD monitor takes to go from black to white and back to black again. It is measured in milliseconds (ms). Lower numbers mean faster transitions and therefore fewer visible image artifacts.

Older monitors with long response times would create a smear or blur pattern around moving objects, making them unacceptable for moving video. Long response times can be annoying to a viewer depending on the type of data being displayed and how rapidly the image is changing or moving. Many current LCD monitor models have improved to the point that this is rarely seen.

A figure of 8 to 16 ms for rise + fall times is typical. The response time was traditionally recorded at the full black > white transition which became the ISO standard for this specification on LCDs. Grey transitions are far more common in practice but in terms of pixel latency, they remained significantly behind the ISO transition. In recent years there have been a wide range of Response Time Compensation (RTC) / overdrive technologies[2] introduced which have allowed panel manufacturers to significantly reduce grey transitions. Response times are now commonly quoted in "GTG" (alternately but less commonly "G2G," meaning: "grey-to-grey"[3]) or "GLRT" (meaning: "Gray Level Response Time"[4]) figures and specs of 6ms, 4ms and 2ms GTG are widely available. There are various names used for RTC technologies, and these vary from one manufacturer to another. Terms such as ClearMotiv (Viewsonic), AMA (BenQ), MagicSpeed (Samsung) and ODC (LG/Philips) are widely used to identify RTC enabled displays.

With a CRT the response times are much faster, and CRTs do not have the same problems with smearing or ghosting. The same is true for plasma displays (however, older CRTs and plasma displays can have problems with flicker).

LCD screens with a high response time value are often unsuitable to play fast paced computer games. A response time of <16ms is sufficient for video-gaming, and the difference between response times once below 10ms begin to become hard to perceive due to limitations of the human eye. [5] [6]

The pixel response time is often confused with the LCD input lag which adds another form of latency to pictures displayed by LCD screens. An LCD screen with high response time and significant input lag will not give satisfactory results when playing fast paced computer games or performing fast high accuracy operations on the screen (e.g. CAD). Manufacturers only state the response time of their displays and do not inform customers of the input lag value.

To address input lag, some modern televisions will offer some sort of "gaming mode" where the TV passes the signal through with minimal processing to minimize any potential image lag.

See also

References

  1. ^  This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).
  2. ^ "Detailed animation of overdrive technology". http://www.r2d.com.tw/index.php?lang=en&page=glrt&menu=service&q=q002#q002. 
  3. ^ TN Film, MVA, PVA and IPS – Which one's for you?
  4. ^ "Illustrations of GLRT and MPRT". http://www.r2d.com.tw/index.php?lang=en&page=glrt&menu=service&q=q001#q001. 
  5. ^ Contemporary LCD Monitor Parameters: Objective and Subjective Analysis
  6. ^ Temporal Resolution

Open source encyclopedia content modification information:

Authorship and Review

Open source encyclopedia content provided here is not reviewed directly by PediaView.com. Content is authored by an open community of volunteers and is not produced by or in any way affiliated with PediaView.com.

Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "LCD response time", which is available in its original form here:

http://en.wikipedia.org/w/index.php?title=LCD_response_time

All Wikipedia text is available under the terms of the GNU Free Documentation License. Wikipedia® itself is a registered trademark of the Wikimedia Foundation, Inc.